Description
Hobbywing QuicRun Fusion PRO 540 2300kV 60/200A ESC motor
The Hobbywing Fusion Pro brushless motor features an improved design and efficient operation. The overall length is 58mm, 6mm shorter than the previous version. The smaller footprint provides spaciousness and makes installation easier. It allows you to adjust the braking force at 8 levels and motor speed at 9 levels, for reliable braking on uneven surfaces. In addition, it is resistant to adverse weather conditions and will perform well on a variety of surfaces.
Rugged construction
Poor weather conditions will no longer limit you. The Fusion Pro motor is IP67 water and dust resistant, so you can use it no matter what the weather. What’s more, it allows you to move over a variety of surfaces, including mud, sand, ice, snow and water without damaging the drive unit.
FOC drive and efficient operation
The improved FOC drive algorithm increases engine efficiency by 8% and reduces power consumption losses by 30%, resulting in a significant increase in power output. The operating temperature is lower during low-speed driving, and the operating time is extended. What’s more, the FOC mode runs smoothly at low speed. In addition, the latest generation motor is extremely quiet and is the best choice for the crawler. Note: This feature is only available in Constant mode.
3 modes of operation
The Hobbywing Fusion Pro offers 3 modes of operation, so you can adjust its performance to your liking. Normal mode allows you to drive forward/reverse and use the brakes. It provides no handbrake effect, and when you release the throttle, the vehicle rolls freely until it stops. The second Normal mode allows you to move forward and backward and is similar to the operation of a brush motor without constant speed. Constant mode (forward and reverse), on the other hand, is distinguished by its constant speed, and is dependent on the throttle rather than the environment.
Advanced electronic switch
Compared to standard on/off switches, the Fusion Pro’s electronic switch is resistant to dust, dirt and water. As a result, it ensures reliability and longer life. Heavy impact or uneven surfaces will no longer affect its performance and protect it from damage.
| Manufacturer | Hobbywing |
|---|---|
| Model | Fusion PRO |
| Number | 30120402 |
| Continuous / peak current | 60 A / 200 A |
| Input voltage | 2-3S Lipo/6-9 Cell NiMH |
| BEC output voltage | Switch mode: 6V/7.4V, 6A |
| KV | 2300 KV |
| Motor length | 58 mm |
| Motor diameter | 37 mm |
| Shaft length | 16 mm |
| Shaft diameter | 3.175 mm |
| Poles | 4 |
| Input wires | Red-14AWG-330mm x1 / Black-14AWG-330mm x1 |
| Input connector | XT60 |
| Scale | 1/10th |
| Type | Brushless |
| Sensors | yes |
| Waterproof | yes |
| Set button on ESC | no |
| LCD Program Box | no |
| LED Program Box | yes |
| Wi-Fi module | no |
| Programming port | Independent programming interface (switch position) |
| Software update | no |
| Dimensions | 37 x 58 mm |
| Weight | 209 g (including cables and connectors) |
| Application | rock crawler 1/10 |
Reviews
There are no reviews yet.